Hitachi VM-3200E Instruction Manual page 26

12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
23.
24.
FADE Button
PUSH AUTO Focus Button
Auto focusing
can
be also performed
during
manual focus mode by pushing this button.
Zoom Ring (Manual Zooming)
Focus Ring
Lens
F1.2 (8.7 ~ 70 mm) 8:1 power zoom lens features
with auto focus and auto iris functions.
Auto Focus Window
OPERATE Switch
OPERATE/Dew Indicator Light
. VIDEO/CAM Select Switch
EJECT Button
Press to insert or remove the cassette.
REW Button
25.
26.
27.
28.
29.
30.
31.
ter or time remaining is present. Press the button
during playback of tape, and the tape is played back
in the rewind direction approximately 3 times faster
than the normal speed to confirm the recorded con-
tents.
Press PLAY button to return to normal play-
back mode or press STOP button to stop tape
movement.
NOTE: You can also visually scan backward when
the camera/recorder
is record/pause
(stand-by)
mode by pressing and holding this button.
PLAY Button
F.FWD Button
Press this button during stop or rewind mode, and
fast-forwarding
starts. "FAST
FWD" indication
appears in the viewfinder whenever the tape
counter or time remaining is present. Press the
button during playback of tape, and the tape is
played back in the forward direction approximately
3 times faster than the normal speed to confirm the
recorded content. Press PLAY button to return to
normal playback mode or press STOP
button to
stop tape movement.
STOP Button
The STOP button is used to stop playback, rewind,
and fast forward operations.
The STOP button has
no effect during record operation.
STILL/REC/PAUSE Button
When this button is pressed during recording, the
tape stops and
the camera/recorder
enters
the
record/pause (stand-by) mode. When this button
is pressed again, the tape runs to resume record-
ing. This button may be also used to display a still
picture during playback mode.
AUDIO DUB Button
This button is used to record new audio in place of
existing audio without erasing the video.
VIDEO DUB Button
This button is used to record new video in place of
existing video without erasing the audio.
TRACKING Control
Used when playing a tape recorded on another
VTR. Adjust for best picture. At all other times
leave it in the center position, which can be found
as a small detent in the movement of the knob.
. EARPHONE Jack
Sound being recorded by the microphone or played
back may be monitored by earphone to this jack.