Hitachi VM-3200E Instruction Manual page 14

USING THE SELF TIMER FEATURE
The self timer allows you to automatically start recording after about ten seconds.
Press SELF TIMER switch once while in the record/
pause mode.
The camera/recorder will automatically start recording
after ten seconds when the switch is pressed and will
continue to record for approx. 30 seconds.
STILL/REC/PAUSE Button
Record Indicator
If you press the SELF TIMER switch twice, the camera/
recorder will automatically start recording after ten
seconds when the switch is pressed and then recording
will continue until the record start/stop button or
STILL/REC/PAUSE button is pressed.
NOTES:
e Pressing SELF TIMER switch a third time before
recording starts releases the self timer mode.
e To stop the camera/recorder during self timer
recording, press record start/stop button or STILL/
REC/PAUSE button and the camera/recorder will
enter the record/pause (stand-by) mode.
m@ FADE-IN
. While the camera/recorder is in the record/pause
mode, press and hold FADE button.
2. Press record start/stop button to start recording.
3. Release FADE button after a few seconds. The pic-
ture will gradually appear on a blank screen.
m FADE-OUT
1. While the camera/recorder is recording, press and
hold FADE button. The picture will graudally disap-
pear from the screen.
2. Continue to hold FADE button, and press record
start/stop button to stop recording.
3. After the recording has stopped, release FADE but-
ton. The picture will reappear in the viewfinder.
NOTE: When using FADE button, both picture and
sound will gradually appear and disappear. The fade
speed is automatically controlled by the camera/
recorder.
—_
FADE Button
17