Programming A Playlist - Emerson EPB-3000 Instruction Manual

Programming a Playlist

When the CD is stopped, you can select up to 20 CD
tracks to play in any order that you choose.
1. Press the STOP key [2] to make sure that playback
has stopped.
2. Press the PROG key [3]. The LED screen [12] will
flash "01" and the Program indicator [9] will flash.
3. Use the REW or FF keys [4, 6] to choose a track to
enter into the playlist.
4. Press the PROG key [3] to save the track into the
playlist. The LED screen [12] will then flash the next
playlist track number (e.g., "02").
5. Repeat steps 3 and 4 until your playlist is complete.
You can save up to 20 tracks.
6. Press the PLAY key [5]. Play will start from the first
track in the playlist and the Program indicator [9]
will flash. Play will stop once all of the programmed
tracks have been played.
7. Press the STOP key [2] to stop the programmed
playlist, then press the STOP key [2] a second time
to clear the playlist from Program memory.
Page 12
L ⚠
Opening the CD compartment [11] will clear
the playlist from Program memory.
If you want to edit the existing playlist:
1) Press the STOP key [2] once to stop
playback; 2) Press the PROG key [3] to enter
program mode; 3) The player will review
and display on the LED screen [12] all of the
existing tracks of the playlist in order; 4)
When the LED screen [12] will flashes "01,"
use the REW or FF keys [4, 6] to select the
program number that you want to edit,
then press the PROG key [3]; Use the REW
or FF keys [4, 6] to select the track you
want to save, then press the PROG key [3].
www.emersonaudio.com