TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrow- WARNING: TO REDUCE THE head symbol, within an equi-...
If, after reading this Manual, you experience any problems with the operation of this product, please refer to the instructions for obtaining service at the end of this Manual. Emerson and Emerson retailers are committed to your satisfaction. Once again, thanks for purchasing this Emerson audio product.
IMPORTANT NOTES CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT APPAREIL Á LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 This product contains a low power Laser Device. • Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much...
PREPARATION FOR USE Unpacking And Set Up • Remove the unit from the carton, and remove all packing materials from the unit. • Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment.
Power Source This system is designed to operate on 120V AC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty. Note: The system has polarized AC plug with one wide blade and one narrow blade.
Battery Back Up System This unit uses a single 9-Volt battery (not included) to maintain the time and alarm settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Alkaline battery for longest life and best performance.
LOCATION OF CONTROLS AND INDICATORS Top Panel Front Panel CKD9902_041707.p65 20 21 22 29 30 17/4/2007, 11:05...
1.) SLEEP Button. 2.) PROGRAM Button. STOP Button. 4.) VOLUME Control. 5.) FUNCTION (RADIO/CD/BUZZER) Selector Switch. 6.) CD compartment. 7.) AC Power Cord. 8.) AUX IN Jack. 9.) FM W ire Antenna. 10.) BAND (FM ST./AM) Selector Switch. 11.) TUNING Control. 12.) CD Door CLOSE Position.
OPERATING INSTRUCTIONS Setting The Time Of Day • Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘ live’ . Do not use an outlet that is controlled by a wall switch. •...
Setting The Wake Up Times The unit has two separate wake up alarms that can be set and used independently. 1.) Press the ALARM 1 or ALARM 2 button once. The display will change from the respective time of day to wake up time and begin flashing.
Listening To The Radio 1.) Press the POWER button to turn the unit ‘ On’ . The POWER indicator comes ‘ on’ . 2.) Set the FUNCTION selector (on left side panel) to RADIO position. Set the BAND selector (on right side panel) to FM ST. or AM. 3.) Turn the TUNING control to find the desired station.
Playing Compact Discs Note: Although this CD player can read CD-R and CD-RW discs, in addition to normal CDs, however the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using.
7.) To Pause briefly during playback press the The track number flashes briefly and the sound stops, but the disc continues to spin. Press PLAY/PAUSE button again to cancel pause and resume playback. 8.) To skip forward or backward to other tracks repeatedly press the buttons until the desired track number appears in the display.
Repeat Playback You can program the player to repeat a single track or the entire disc continuously. One Track Repeat 1.) Load your disc and start playback as usual. 2.) Press the P•MODE button once. The REPEAT indicator flashes. 3.) Press the button to select the track to be repeated.
Random Playback To listen to the tracks on a disc in random order: 1.) Load your disc and wait until the total track number is displayed. 2.) Press the P•MODE button three times. The RANDOM indicator comes ‘ On’ . 3.) Press the PLAY/PAUSE button.
Programmed Playback The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired.
7.) After you have programmed all the desired tracks press the button to begin programmed playback. The PROGRAM indicator stops flashing and remains ‘ On’ . Playback will begin on the first track you programmed and continue until all programmed tracks have been played. PROGRAM REPEAT RANDOM...
Auxiliary Input Jack (Connection Cable Not Included) This unit includes an AUX IN input jack to allow you to connect external devices, ® such as an iPod or portable MP3 player, and listen to the music stored on your external device through the speakers of this radio. Connect the headphone jack of your external device to the AUX IN input jack located on the back cabinet of this unit.
Alarm Operation This unit gives you the option of waking to an electronic Buzzer alarm, the AM/FM Radio, or the CD player. Notes: A.) Whichever alarm mode you select – BUZZER, CD or RADIO – will apply to both alarms. Refer to “Setting The Wake Up Times” on page 10. Adjust the wake up time(s) if necessary.
Wake To Radio 1.) Set the FUNCTION selector to RADIO position. Set the BAND selector to FM ST. or AM, and tune to the desired station. 2.) Adjust the VOLUME level then press POWER button to turn ‘ Off’ . 3.) Press the ALARM 1 and/or ALARM 2 buttons.
Wake To CD 1.) Set the FUNCTION selector to the CD position, load the desired disc, and begin playback as usual. 2.) Adjust the VOLUME control to the level required to wake you up in the morning, then press the POWER button to turn the unit ‘ Off’ . 3.) Press the ALARM 1 and/or ALARM 2 buttons.
Sleep To Music Timer You can use the sleep timer to fall asleep to the Radio or CD player for 90, 60, 30 or 15 minutes and have the unit shut off automatically. • Press the POWER button or simply the SLEEP button to turn the power ‘ On’ . Operate the Radio or CD player as usual.
CARE AND MAINTENANCE Compact Disc Care • To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc’ s recorded surface with a soft cloth.Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris, so gently wiping with a soft cloth should remove most particles.
Wipe disc with cloth or use another disc. TO FIND THE LOCATION AND PHONE NUMBER OF YOUR NEAREST SERVICE CENTER PERMITTED TO PERFORM WARRANTY... 1-800-695-0098 PLEASE CALL: 1-800-898-9020 Emerson Radio Corp., Consumer Affairs Dept., 5101 Statesman Drive, Irving, TX 75063. 17/4/2007, 11:06...
For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $9.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase.
CKD9902-041707-01 Printed in China CKD9902_041707.p65 17/4/2007, 11:06...