Pioneer SPH-DA77DAB Operation Manual page 65

 This type of file is not supported on this
product.
– Select a file that can be played.
 Security for the connected USB storage
device is enabled.
– Follow the USB storage device
instructions to disable security.
 This product cannot recognise the
connected USB storage device.
– Disconnect the device and replace it
with another USB storage device.
Audio Format not supported
 This type of file is not supported on this
product.
– Select a file that can be played.
No Data
 There is no playable file in the USB
storage device.
– Check that the files in the USB storage
device are compatible with this
product.
 Security for the connected USB storage
device is enabled.
– Follow the USB storage device
instructions to disable security.
Apple CarPlay
Connection failed.
 Communication failed and the system is
trying to connect.
 Wait for a while. Then, perform the
actions below if the error message is still
displayed.
– Restart the iPhone.
– Disconnect the cable from the iPhone,
and then connect the iPhone again
after a few seconds.
– Turn the ignition switch to OFF and
then to ON.
Please attach the GPS antenna in order to
use Apple CarPlay over Wireless.
 This unit cannot properly detect the
GPS signal from the GPS aerial.
– Check the GPS aerial installation and
connection. For details about the
connection and installation, refer to
the Installation Manual.
Android Auto
• Connect a USB cable to get started.
• Your phone does not support wireless,
check your phone.
 The connected device is not compatible
with Android Auto.
– Check if the device is compatible with
Android Auto (page 41).
 Android Auto app is not installed on the
device.
– Install the Android Auto app on the
device.
Connection failed. Please check your
phone to confirm connection.
 Wi-Fi connection failed and Android
Auto app did not start.
– Check if the Wi-Fi function on the
device is turned on.
Android Auto has disconnected.
 Wi-Fi function on the device or the unit
is turned off.
– Turn on the Wi-Fi function on the
device and the unit when you use
Android Auto (page 24).
To use Android Auto, please stop your car
and follow the instructions on your
phone
 The default settings are displayed on
the screen of the Android Auto
compatible device or images are not
output from the Android Auto
compatible device.
- 65 -