Project Source F51A1114CP Manual page 7

ASSEMBLY INSTRUCTIONS
4. Determine which type of connection you will be
making. (1) Ball nose risers (3/8" O.D. copper
tubing) with coupling nuts (not included) or (2) 1/2"
I.P.S faucet connectors. Attach water supply lines
(not included) to the faucet (A).
5. Install the main plunger (D) and the drain
assembly (G) above sink. From below sink,
install the rubber washer (E) and lock nut (F).
6. Connect 1-1/4" I.D. tail piece on pop-up drain
to waste outlet (not included). Check all drain
connections and P trap for leaks.
4
4
5
5
D
G
E
6
F
6
7
A
4-1 4-2
1 2
5
1
2
3