Configuring Autorate - Paradyne Hotwire 7985 Installation Instructions Manual

Configuring AutoRate

"
16
The M/HDSL AutoRate function is controlled from the Network Interface Options
screen and allows you to enable or disable AutoRate from a unit configured as an
LTU. To access the Network Interface screen, follow this menu selection
sequence:
Main Menu Configuration
Procedure
The AutoRate option defaults to Enable. To disable AutoRate:
1. Position the cursor in the AutoRate field and press the spacebar.
The AutoRate field toggles to Disable and the DSL Line Rate field is
displayed.
2. Enter a DSL Line Rate and press Enter.
Your payload rate is set to a default value determined by your LTU DSL Line
Rate. Use Table 10, Selectable Payload Rates When AutoRate Is Disabled, if
you wish to select a different Payload Rate.
Table 10. Selectable Payload Rates When AutoRate Is Disabled
DSL
Line
Rate Selectable Payload Rates (default in boldface type)
144 128 64
272 256 192
400 384 320
528 512 448
784 768 704
1040 1024 960
1552 1536 1472
2064 2048 1984
March 1999
Network
640 576
896 832
1408 1344 1280
1920 1856 1792
1216 1152 1088
1728 1664 1600
7985-A2-GZ40-00