Electrolux ESV093C3XB User Manual page 9

After starting up T-ON or T-OFF,set the constant cir-
culating valid.
After that,air conditioner will be turned on or turned off
according to setting time.ON/OFF button has no effect
on setting.If you don't need this function, please use r-
emote controller to cancel it.
I FEEL
Press this button to start I FEEL function and "
will be displayed on the remote controller. After this
function is set, the remote controller will send the
detected ambient temperature to the controller
and the unit will automatically adjust the indoor te-
mperature according to the detected temperatu re.
Press this button again to cancel I FEEL function
and " " will disappear.
Please put the remote controller near user when this
function is set. Do not put the remote contro ller
near the object of high temperature or low temper-
ature in order to avoid detecting inaccurate am bie-
nt temperature.When I FEEL function is turned on,
the remote controller should be put within the a rea
where indoor unit can receive the signal sent by the
remote controller.
CLOCK
Press this button to set clock time. "
remote controller will blink. Press "
button within 5s to set clock time. Each pressing
of " " or " " button, clock time will increas e or
decrease 1 minute.If hold " " or "
later, time will change quickly. Release this button
when reaching your required time. Press "CLOCK"
button to confirm the time. "
N
Clock time adopts 24-hour mode.
The interval between two operations can
Otherwise, remote controller will quit setting status.
Operation for TIMER ON/TIMER OFF is the same.
SLEEP
Under COOL, or HEAT mode, press this button
to start up sleep function.
" " icon is displayed on remote controller. Press
this button again to cancel sleep function and
" " icon will disappear.After powered on, Sleep
Off is defaulted. After the unit is turned off, the
Sleep function is canceled.
In this mode, set temperature will be adjusted
with the change of time. Under Fan、 DRY and
Auto modes, this function is not available.
"
" icon on
" or " "
" button , 2s
" icon stops blinking.
'
t exceed 5s.
X-FAN
Pressing this button in COOL or DRY mode, the
icon " " is displayed and the indoor fan will
continue operation for a while in order to dry the
indoor unit even though you have turned off the
unit. After energization, X-FAN OFF is Having
set X-FAN function on: After turning off the unit
by pressing ON/OFF defaulted. X-FAN is not
available in AUTO, FAN or HEAT mode.
This function indicates that moisture on evapora-
tor of indoor unit will be blowed after the unit is
stopped to avoid mould.
Having set X-FAN function on: After turning off
the unit by pressing ON/OFF button indoor fan
will continue running for a while. at low speed.
In this period, press X-FAN button to stop indoor
fan directly.
Having set X-FAN function off: After turning off
the unit by pressing ON/OFF button, the complete
unit will be off directly.
I CLEAN
When appliance is off, press the I CLEAN
button to activate the I CLEAN feature, "
will show in the remote controller with flashing
in few seconds, your unit will clean itself
automatically. Airborne bacteria can grow in
the moisture that condenses around heat
exchanger in the unit. With regular use, most of
this moisture is evaporated from the unit. You
can use I CLEAN feature as often as you like.
LIGHT
Press this button to turn off display light on indoor
unit. " " icon on remote controller disappears.
Press this button again to turn on display light.
" " icon is displayed.
TEMP
By pressing this button, you can see indoor set
temperature , indoor ambient temperature or out-
door ambient temperature on indoor unit's display.
The setting on remote controller is selected circu-
larly as below:
no display
ENGLISH 9
"