Table of Contents
Advertisement
3.5 Replacement of batteries in
remote controller
①
②
Fig.1
1.
Lift the cover along the direction of arrow
(as shown in Fig 1 ① ).
Take out the original batteries (as shown in
2.
Fig 1 ② ).
3.
Place two 7# (AAA 1.5V) dry batteries, and make
sure the position of " + " polar and " - " polar is
correct (as shown in Fig 2 ③ ).
Reinstall the cover (as shown in Fig 2 ④ ).
4.
NOTICE
During operation, point the remote control signal
sender at the receiving window on indoor unit.
The distance between signal sender and receiving
window should be no more than 8m, and there
should be no obstacles between them.
Signal may be interfered easily in the room where
there is uorescent lamp or wireless telephone;
remote controller should be close to indoor unit
during operation.
Replace new batteries of the same model when
replacement is required.
'
When you don
t use remote controller for a long time,
please take out the batteries.
If the display on remote controller is fuzzy or there
no display, please replace batteries.
④
③
Fig.2
'
s
ENGLISH
11
Advertisement
Table of Contents
