Eiki EK-400XA Service Manual page 42

3. You can use the cursor buttons ▲▼◄► either on keypad or IR remote control for password
entry. You can use any combination including the same arrow five times, but not less than
five. Press the cursor buttons in any order to set the password. Push the MENU button to
exit the dialog box
4. The password confirmation menu appears when user presses the power-on key in case the
Security Lock is enabled.
7-1. DLP Projector Security Unlock
When you forget the password,
Please input the wrong password five times by the remote control, then the projector will
display a "Hint code" on the screen. Write down the recall code number.
42