Panasonic RR-930 Operating Instructions Manual page 7

B Fast Forward and Rewind
When the unit is in the stop mode, (Tape Running Indicator
light off), pressing the Fast Forward/Cue Button or the
Rewind/Review Button will cause the tape to run quickly
towards the end or beginning of the tape respectively, with-
out monitoring the sounds recorded on the tape.
Fast Forward
@4FF/CUE €PLAY
Rewind
4 PLAY REW/REV Pe [e RECO
t
Note:
Always press the Stop/Eject button first, during Fast
Forward or Rewind operation, before pressing
PLAY, RECORD, or changing the tape operation.
@ Cue and Review
When the unit is in the play mode, (Tape Running Indicator
lights on), pressing the Fast Forward/Cue Button or Re-
wind/ Review Button will cause the tape to run quickly to-
wards the end or beginning of the tape respectively, while
monitoring the sounds recorded on the tape.
Cue
44FF/CUE 4PLAY
t
Review
4PLAY REW/REVb® [© RECO
t
PUNE
@ Silent Auto-Stop
When the tape reaches its end, during playback, record,
fast forward, or rewind, the tape travel will automatically
stop. Be sure to press the Stop/Eject Button to release the
function buttons.
Note:
When the tape reaches its end the auto-stop mecha-
nism functions to stop the motor motion and to turn
off the Running Indicator.
@ Using Foot Controller
1. Insert the connection cord of the Foot Controller into
the Foot Controller Jack.
2. Insert a microcassette in the Cassette Holder.
. Set this unit to the playback mode.
. Step on the Start Pedal {right side) and playback will
begin.
Hold down the pedal and playback will continue. The
Tape Running Indicator will light up.
5. Remove foot from the Start Pedal and playback will stop.
6. Step on the Backspace Pedal and the tape will be
rewound. The Tape Running Indicator will light up.
7. Remove foot from the Backspace Pedal and rewind will
stop.
&W
® Auto Back Space Function
When using the Foot Controller it is possible to have Auto
Back Space when the Start Pedal is released. The amount
of Auto Back Space is controlled by the "Back Space
Control" on the main unit.
Note:
* The unit is put into pause mode when the Foot
Controller pedals are released. Do not leave the
machine in this mode for long periods of time. Be
sure to press the Stop/Eject Button and Power
Switch to turn the unit off.
Backspace
Pedal
Start
Pedal