Panasonic RR-930 Operating Instructions Manual page 5

FON Ma) SOUS
@ For Use with Household Power (AC Power)
Connect the AC power cord into the electrical outlet. (Grounding-type power outlet only.)
(120 V/60 Hz)
MICGROCASSEMNEVINSERTION RSTO NL
@ Cassette Insertion
1. Press the Stop/Eject Button to open the Cassette
Holder.
2. Carefully insert the tape in the Cassette Holder.
Note:
The microcassette cannot be inserted backwards. Do
not force.
3. Close the Cassette Holder.
@ Cassette Removai
¢ Before removing, press the stop/Eject Button to stop the
tape.
1. Press the Stop/Eject Button to open the Cassette Hold-
er.
2. Remove the cassette.
3. Close the Cassette Holder.
WAAsSAaS®) STU Soyo
@ Standard Play (2.4)
When the Tape-Speed Selector is set to the "SP (2.4)"
position, it is possible to record on both side of an MC-60
tape for a total of 60 minutes.
This speed is suggested for best recorded sound quality. ei! oe "fl
@ Long Play (1.2)
To record a meeting or conference, where long recording TAPE
time is required, set the Tape-Speed Selector to the "LP SPEED
(1.2)" position.
This will make it possible to record on both sides of an MC-
60 tape for a total of 120 minutes.
If the tape is to be played back on a different unit, it is
suggested that the Standard Play (2.4 cm/s) speed be used
whenever possible. This will insure the best possible sound
quality upon playback.
@ Tape Speed Control
When the Tape Speed Control is moved in the "+"
direction as far as it will go during playback, the tape
speed is increased by about 20%. Conversely, when it is
moved in the "—" direction as far as it will go, the tape
Speed is reduced by about 20%. Set this control to the
center click-stop position for listening to tapes at the
standard speed. The tape speed cannot be varied during
recording.