Panasonic RR-930 Operating Instructions Manual page 6

e Set the Tape Speed Selector to the same position as when the tape was originally recorded.
e Insert a microcassette tape (Refer to "MICROCASSETTE INSERTION AND REMOVAL" on page 5.)
@ Follow the numbered order.
Headset
(Included)
1 Press the Power Switch.
The Power Indicator will light up.
The sound from
the speaker is
cut off when the
headset is con-
nected to the
The Tape Running Indicator will light up.
MONITOR (8Q)
@ PLAY
"TAPE RUN™
BAS
3 Adjust the Volume and Tone Controls.
4 Press the Stop/Eject Button to stop the tape.
@ STOP/ 4 EJECT
'
LMTIALATINLIT
al
UN TUL LTLINT
EET
< oO = Cc = m
TONE
Listen to the playback sound through the
speaker.
@ Cassette Tapes a
Only cassette tapes bearing the "Cacrocasserte) " logo.
e Use cassette tapes designated as NORMAL. Other types Pencil OK I¥ the tape loosens, take up
of cassette tapes will not yield optimum performance. ne BON PY ines ee
in the proper direction.
Note:
Cassettes, both recorded and unrecorded, should
not be stored in locations with high temperature,
high humidity or direct sunlight. Never place a
recorded cassette near a magnetic source, such as
a magnet or a TV set as this may affect tape
performance.
Do not handle, or
pull the tape out of
the cassette.