Alpine 7294R Owner's Manual page 15

Other Convenient Functions
Manual tracing operation:
Setting the PI in the Preset Memory
2. Press one of preset buttons 1 to 6 for two seconds.
. Set other preset buttons in the same way.
RDS auto memory function
Six RDS stations can be stored in the preset memory in order according to the best
reception conditions.
Set to the RDS station reception mode.
Press the TUNE switch @ to set the AIMEMO mode, then press the UP or DN switch (@
or ©) to start the auto memory operation.
CAUTION:
1. The Pl and PS data stored in the memory are cleared when the auto memory function
is used, so set them in the memory once again.
2. The Pl and PS data are not stored in the memory when RDS stations are preset using
the auto memory function.
To use the PI memory function, press the preset button after the auto memory
operation is finished and store the Pi data in the preset memory.
15