Table of Contents
Advertisement
Fault
Plastic parts inside the
appliance are discol-
oured.
Plastic parts are dis-
coloured.
Removable streaks
are present on
glasses, glassware
with a metallic appear-
ance and cutlery.
Cause and troubleshooting
Plastic parts inside the appliance may become discol-
oured during the life of the dishwasher.
Discolouration can come about and will not impair
▶
functioning of the appliance.
Washing temperature is too low.
Select a programme with a higher washing temper-
▶
ature.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Amount of rinse aid to be dispensed is set too high.
Set the rinse aid system to a lower setting.
▶
No rinse aid has been added.
Add rinse aid.
▶
→ "Adding rinse aid", Page 32
Detergent residue is present in the final rinse. Lid of
the detergent dispenser is blocked by tableware items
and will not open fully.
Arrange tableware in the top basket tableware so
1.
the tab collecting tray is not obstructed by table-
ware.
→ "Arrange tableware", Page 37
Items of tableware are blocking the dispenser lid.
Do not place tableware or fragrance dispensers in
2.
the tablet collecting tray.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.
Only remove large remnants of food and do not
▶
prerinse tableware.
Troubleshooting en
55
Advertisement
Table of Contents
