Table of Contents
Advertisement
en Troubleshooting
Fault
E:18 or indicator for
water supply lights up.
1
E:22 lights up.
E:24 lights up. Water
is not drained.
1
Depending on the appliance specifications
48
Cause and troubleshooting
The flow rate must be at least 10 l/min when the
water supply is open.
The filters in the water connection of the supply or
AquaStop hose are blocked.
Switch off the appliance.
1.
Pull out the mains plug.
2.
Turn off the water tap.
3.
Unscrew the water connection.
4.
Remove the filter from the supply hose
5.
Clean the filter.
6.
Re-insert the filter in the supply hose.
7.
Screw the water connection back on.
8.
Check the water connection for leaks.
9.
Restore the power supply.
10.
Switch the appliance on.
11.
Filters are soiled or blocked.
Clean the filters.
▶
→ "Cleaning filters", Page 44
Not an appliance fault. Siphon connection is still
closed or the wastewater hose is kinked or blocked.
Check the connection to the siphon and open if ne-
1.
cessary.
Install wastewater hose without kinks.
2.
Remove residues.
3.
Advertisement
Table of Contents
