Table of Contents
Advertisement
Replacing Stop, Turn, Tail, Side Marker, and Backup Lamp Bulbs
The stop, turn, tail, side marker, and backup lamp bulbs are located in
the tail lamp assembly. Follow the same steps to replace any of the
bulbs:
To install the lamp, follow the removal procedures in reverse order.
2013 Econoline (eco)
Owners Guide gf, 3rd Printing, May 2013
USA (fus)
Maintenance
1. Turn the headlamp switch to the
off position, then remove the four
screws and the lamp assembly from
the vehicle.
2. Rotate the bulb socket
counterclockwise and remove it
from lamp assembly.
3. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
229
Advertisement
Table of Contents
