Recording On A Tape Deck "Cuisses - Technics SA-DX930 Operating Instructions Manual

|
H
i
D
|
RQT4918
}
i
i „—
iie, ashinda: — te el T lan a, a aiaia Da tee lg Ns E S ET REIR ea
INPUT SELECTOR
(
TAPE MONITOR
= XII -— —Ó—
INPUT SELECTOR
O)
| Making a recording
You cannot record a source connected through a digital terminal.
Recording on a tape deck 5
Before recording, prepare the tape deck.
See the tape deck's operating instructions for details.
Turn [INPUT SELECTOR] to select the source
to be recorded.
Any source can be selected except TAPE.
Begin recording on the tape deck.
Follow your tape deck's operating instructions.
Begin the source to be recorded.
Follow your equipment's operating instructions.
To monitor the recorded sound E
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and set the
monitor button on the tape deck to "TAPE".
Press [TAPE MONITOR] once again to turn it off.
Recording on a VCR
Before recording, prepare VCR.
See the VCR's operating instructions for details.
Turn [INPUT SELECTOR] to select the source
to be recorded.
Any source can be selected except VCR and TAPE.
Recording from the tape deck is not possible.
Begin recording on the VCR.
Foliow your VCR's operating instructions.
Begin the source to be recorded.
Follow your equipment's operating instructions.