Adjusting The Delay Time Uie - Technics SA-DX930 Operating Instructions Manual

Preparing for surround sound
Adjusting the delay time
by remote control only
By adjusting the delay time, the difference in the distance from the
viewing and listening position to the front speakers and the
distance to the center speaker and surround speakers can be
offset and made equal. This achieves better sound localization
and makes a more life-like reproduction of the sound field
possible.
Preparation
Prepare the unit in this manner even if you intend to playback
analog sources.
e Select "DVD" with [INPUT SELECTOR] but ensure the source
itself is off.
€ Press (DIGITAL INPUT] to select "DIGITAL".
E
|
|
:
|
=
|
|
Please note that following occurs if delay time is adjusted while
playing back a source or analog input is selected:
e Adjustment is not possible if the source is DTS format.
e While the DO PRO LOGIC indicator is alight, the center channel
cannot be adjusted and 15 ms are added to the delay times
listed for surround channel.
Ud tee dH in TI
PRS THOMAE OH HH NM HH
Press [SURROUND] to select "SURROUND".
"SURROUND" appears on the display.
* . .* * * * + > * . ss» +è * è * ee è ò 9 €" è ^ ^^ e .
Press [DELAY] to select the channel to be
adjusted.
The current delay time is displayed.
Press again to change the speaker channel;
C (Center speaker) = S (Surround speakers)
atl 7i al l l Speakers set as "NONE" are skipped.
Press [-] or [+] to set the delay time.
The delay time changes with each press.
The increments depend on the channel being adjusted.
+
(6.
| ET HO Y
Na pu HOTEL. |
Available delay time setting (ms)
0,1,2,3,4,5
0, 5, 10, 15
seb See page 28 for information about delay time.
The display is restored if a button isn't pressed for 4 or more =
Soun mode
seconds.
RQT4918