Technics SA-DX930 Operating Instructions Manual page 13

FM outdoor antenna
ger (not included)
75 Q coaxial cable
(not included)
@ Remove a piece of the outer
vinyl insulator.
qo) Cmm
20 mm (25/32")
(2) Twist the shield braid to expose
the core wire.
Core wire
MO
Shield braid
10 mm (3/8")
(3 Connect the shield braid and
the core wire as shown at left.
Vinyl-covered wire
(not included)
ut
AM loop antenna
(included)
n———————————
| Antenna connections -
FM outdoor antenna (not included) "n
An outdoor antenna should be used when using this unit in
mountainous areas or in spaces enclosed by reinforced concrete
where the FM indoor antenna (included) does not provide
satisfactory reception.
Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.
An outdoor antenna should be installed by a qualified technician
only.
AM outdoor antenna (not included) E
An outdoor antenna should be used when using this unit in
mountainous areas or in spaces enclosed by reinforced concrete
where the AM loop antenna (included) does not provide
satisfactory reception.
Stretch 5-12 m (16-40 ft.) of vinyl-covered wire horizontally
across a window frame or other convenient location, keeping it as
high as possible from the ground.
When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning. Never
use an outdoor antenna during an electrical storm.
Be sure to connect the AM loop antenna even when an outdoor
antenna is used.
ions
Conn
i i
! |
RQT4918