Titan TTB956GLG Manual page 16

Care and maintenance
EN EN
General cleaning
NOTE: Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they might be
harmful to its surfaces.
4. Check for any damage and wear. Repair damages in accordance with this
instruction manual or take it to an authorised service centre before using the
product again.
Power cord
If the power cord is damaged, it must be replaced by the manufacturer, its service
UK plug (for UK only)
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral
Brown – Live
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red.
Outer sleeve
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
16
MNL_Greatstar_25W Glue Gun_V2_230524.indd 16
Connect
Blue to
N(Neutral)
TTB956GLG by TITAN
.
5 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip
5/26/23 12:26 PM