Table of Contents
Advertisement
Before you start
EN
Stand holder
6
Glue stick
WARNING! Always use the correct glue stick according to the intended
use!
Observe the technical requirements of this product (see section
purchasing and using the glue stick (7)!
Insert the glue stick
1. Check the size of glue stick (7) is
between 10.8-11.5 mm in diameter.
2. Align and insert the glue stick (7)
into the feeding channel (2) until it
stops (Fig. 3).
WARNING! Do not try to remove the used glue stick (7) from the feeding
channel (2). Once used, a glue stick (7) must be used up completely.
10
MNL_Greatstar_25W Glue Gun_V2_230524.indd 10
Fig. 1
TTB956GLG by TITAN
6
Fig. 2
7
2
Fig. 3
5/26/23 12:26 PM
Advertisement
Table of Contents
