Titan TTB956GLG Manual page 15

TTB956GLG by TITAN
After use
1. Disconnect the glue gun from the power supply and place the glue gun on a
stable, level surface by using its stand holder (6) when not in use.
WARNING! Hot surface. Risk of scalding!
(1).
2. Allow the hot glue gun to cool down for at least 30 minutes.
3. Check, clean and store the product as described below.
The golden rules for care
WARNING! Always disconnect the product from the power supply and
let the product cool down before performing inspection, maintenance
and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
WARNING! Only perform repairs and maintenance work according to
specialist!
General cleaning
1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for
areas that are hard to reach.
2. In particular clean the air vents after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
MNL_Greatstar_25W Glue Gun_V2_230524.indd 15
Operation / Care and maintenance
EN EN
15
5/26/23 12:26 PM