Paradyne COMSPHERE 3821Plus User Manual page 113

Originate_Secur: No_OrigSec
Nxt No_OrigSec Ena_Orig_Sec
Originate Security Mode. This configuration option is read-only and cannot be changed from the Configure branch; it
can be changed only with an AT command.
This configuration option enables or disables security protection used for outbound calls when using the
AT command autodialer function.
CallBack_Secur: Disable
End Disable Enable
Callback Security. This configuration option is read-only and cannot be changed from the Configure branch; it can
be changed only with an AT command.
This configuration option enables or disables Callback Security. It should be used only if Answer Security is enabled.
The factory default is Disable.
3821-A2-GB20-30
Table 7-5
(3 of 3)
Security Configuration Options
February 1998
Security
7-11