Kohler Stillness Smart Soak K-31404-PF-HW1 Installation Instructions Manual page 9

5. Complete the Bath Installation
CAUTION: Risk of personal injury. This bath is extremely heavy. Obtain sufficient help and use lifting straps to lift
or move the bath.
NOTE: Refer to the homeowners guide to pair the remote control. Use the remote control to check the bath fill and drain
operation.
Place the Bath
Use lifting straps and get additional assistance to remove the support blocks and carefully lower the bath to the floor.
Verify that the bath is level. Loosen the nuts to adjust the bath feet, as needed.
Check for Leaks
Tighten the union of the P-trap and bath.
Fill the bath and check the drain connections for leaks.
Optional: Apply a thin and continuous bead of clear or color-matched silicone sealant to the seam between the bath
and the finished floor.
Kohler Co. 9
1485077-2-A