Kohler Stillness Smart Soak K-31404-PF-HW1 Installation Instructions Manual page 7

3. Connect the Pipes to the Bath
CAUTION: Risk of property damage. Provide a watertight seal on all drain connections.
NOTE: The P-trap union is not supplied with the product. Install a union between the street elbow and P-trap to allow
removal of the street elbow for maintenance and cleaning.
Install the Drain Union
Using a flathead screwdriver, carefully remove the access panel from the bath. Exercise caution to not scratch the bath.
Install the P-trap union to the bath drain.
Verify that the street elbow aligns with the P-trap. Carefully reposition the bath as needed.
Prepare the male and female sections of union to the P-trap and the bath.
Attach Water Supply Tubing
Remove the cap from the bath inlet.
Attach a water supply tubing to the bath inlet. The connection to the digital valve supply line will be made after the
bath is lowered to the floor.
Kohler Co.
Water Supply Tubing
Bath Inlet
Union (Not Provided).
P-Trap
7
Water Supply Tubing
1485077-2-A