Entrust nShield Solo Installation Manual page 7

C.4 XenServer environments
C.4.1 Configure the XenCenter 6.5 client
C.4.2 Create a XenServer guest instance and hardserver configuration
C.5 Hyper-V environment (Windows Server 2012)
C.5.1 Install Hyper-V on the server
C.5.2 Add the Hyper-V role to the server
C.5.3 Configure Hyper-V
C.5.4 Create the VM guest instance and hardserver configuration
C.5.4.1 Install the CipherTools software:
C.5.4.2 Configure the hardserver to export the module to guest VM usage
C.5.4.3 Configure the second guest VM instance
C.5.4.4 Configure the hardserver to enroll to the primary guest hardserver via IP address
using the virtual switch
C.5.4.5 Confirm the connection to the second guest VM
C.5.4.6 Create secondary WM guests
C.6 Hyper-V environment (Windows Server 2016)
C.6.1 Set up
C.6.1.1 Install Hyper-V on the server
C.6.1.2 Add the Hyper-V role to the server
C.6.1.3 Prepare the server
C.6.1.4 Prepare the device
C.6.1.5 Install the CipherTools software
C.6.1.6 Create the VM guest instance on the server
C.6.1.7 Configure the VM guest instance on the server
C.6.2 Remove a device from the VM guest instance
C.6.3 Undo Passthrough
Page 8 nShield® Solo and nShield® Solo XC - Installation Guide
74
74
76
77
77
77
77
78
78
78
79
79
80
80
81
81
81
81
82
82
83
83
84
85
85