Dual-Element Transducers
NOTICE
Connecting the high-frequency wires to the low-frequency terminal block, or the low-frequency wires to the
high-frequency terminal block, damages the device and the transducer.
For dual-element transducers, the low-frequency element wires must be connected to the terminals labelled
LOW and the high-frequency element wires must be connected to the terminals labelled HIGH. Ground (GRND),
temperature (TEMP), XID and GID wires can be connected to either set of terminals.
Two Single-Element Transducers
To ensure proper transducer identification and safe operation, you must connect each single-element
transducer to its own set of terminals.
8