Identity Descriptions; Circuit Quality; Identity - Paradyne COMSPHERE DualFlow 3615 User Manual

COMSPHERE DualFlow Data Service Units

Circuit Quality

Circuit Quality (CircQ) shows the level and quality of
the signal being received from the network by the DBM.
This subbranch is only available for a V.32 DBM.

Identity

Identity (ID) displays a listing of the DSU's model and
serial numbers, the equipment installed (DBM), software/
firmware versions, the network address, the DDS or
DSU's rate, and the DBM's rate.
Description
Model:
S#:
DSU SW ver:
Netwrk Addr:
DSU Rate:
DBM SW ver:
( Switched 56 DBM only )
DBM Rate:
DBMtype: xxx yy.y z
App Modul:
App Modul:
4-6
Table 4-1

Identity Descriptions

3615 or 3616.
Unit serial number.
Software/firmware version residing on the DSU.
Unit's network address.
Value set for DSU Rate(Kbps) configuration option; the DSU's aggregate speed. This
does not appear if a DBM has its DBM Primary Core configuration option set to Yes.
Software/firmware version residing on the Switched 56 DBM.
Value set for DBM Rate(Kbps) configuration option; the DBM's aggregate speed.
Type of DBM installed:
xxx can be either
V (V.32 DBM),
4wS (4-wire Switched 56 DBM), or
2wS (2-wire Switched 56 DBM).
yy.y indicates the DBM's maximum speed.
z designates whether the
DBM Primary Core option was enabled.
(A P indicates Primary Core is enabled.)
Only appears when a DBM is installed.
ASPEN. Appears when the Single-Port Async/Sync feature is installed.
CISC or 64CC.
CISC when the Clear Channel with Integrated Secondary Channel chip is present.
64CC when the CISC chip is not present.
July 1999
"
Procedure
1. Press the key to scroll ID into view.
2. Press the function key (F1, F2, or F3) directly
below the selection. One field at a time is
displayed.
3. Press the key to display the information, one
display (screen) at a time.
Table 4-1 lists the Identity information provided about
the DSU and its equipment.
Information Displayed
3615-A2-GB20-40