4. Troubleshooting
4-1-10. Reference
Output CNT which run Edge Led
(Is unrelated even if right and left changes)
If one side of the screen appears to be darker
than the other side, swap connectors 1 and 2.
If the same problem exists, panel is defective.
If the dark side switches to opposite side, then
the power supply is at fault.
Refer to the picture for matching each LED part of
connector .
however, when pull out pair pins in connector, there
is hardly different, so we recommend to change (1)
itself or (2) itself.
a
b
4-31