Samsung UN46B8000XFXZA Service Manual page 42

Gerneral Pairing
You can pair the TV and the remote control so that the remote control only controls the TV
1. Plug the TV power plug into the power outlet.
Turn the TV power switch off.}
2. Press the PAIRING on the remote control button.
Use a sharp object to press the button.
Keep a distance of less than 1m between the TV and the remote control
3. Press the POWER button on the front panel of the TV. The TV is turned on and Pairingwith the
remote control is automatically completed.
4. Press the remote control buttons to check if the remote control is properlypaired.
If the remote control does not work, attempt the pairing process again.
If the remote control does not work even after the above measures have been taken,
press the RESET button, and replace the batteries.
Finding the Remote Control
1. Press the Volume(-) button on the front panel of the TV and hold it down for 10 seconds.
The TV will transmit a signal to find the remote control.
2. The remote control will generate an alarm sound for 30 seconds. Search for the remote control from the
location where the sound is heard the loudest. If no sound is heard, please try again.
3. If the remote control has been found, press any remote control button to stop the sound.
2. Product specifications
2-23