CORRECT MAINTENANCE AND INSPECTION
PROCEDURES
Learn how to service your machine correctly. Follow the
correct maintenance and inspection procedures shown in this
manual.
Inspect machine daily before starting.
• Check controls and instruments.
• Check coolant, fuel and oil levels
• Check for leaks, kinked, frayed or damaged hoses and
lines.
• Walk around machine checking general appearance,
noise, heat, etc.
• Check for loose or missing parts.
If there is any problem with your machine, repair it before
operating or contact your authorized dealer.
IMPORTANT: • U s e o n l y r e c o m m e n d e d f u e l a n d
lubricants.
• Be sure to use only genuine Hitachi parts.
Failure to do so may result in serious injury
or death and/or machine breakdown.
• Use only genuine HITACHI parts.
• Fa i l u r e t o u s e r e c o m m e n d e d f u e l ,
lubricants, and genuine Hitachi parts will
result in loss of Hitachi product warranty.
• Never adjust engine governor or hydraulic
system relief valve.
• Protect electrical parts from water and
steam.
• Never disassemble electrical components
such as main controller, sensors, etc.
MAINTENANCE
8-1
SA-005