Hitachi ZAXIS 210LC-3 Operator's Manual page 2

This Operator's Manual has been compiled for the Mate-
rial Handling Machine of ZX210LC
470LCH Hitachi Hydraulic Excavator.
-3
Only the parts that differ from those on the ZX210LC
250LC , 350LC , 470LCH
-3 -3
described in this manual.
Refer to the Operator's Manual for ZX210LC
350LC , 470LCH Hitachi Hydraulic Excavator for other
-3 -3
inquiries than described in this manual.
Read this manual carefully to learn how to operate and
service your machine correctly. Failure to do so could re-
sult in personal injury or machine damage.
This manual should be considered a permanent part of
your machine and should remain with the machine when
you sell it.
This machine is of metric design. Measurements in this
manual are metric. Use only metric hardware and tools as
specified.
• SI Units (International System of Units) are used in this
manual.
For reference MKS system units and English units are
also indicated in parentheses after the SI units.
Example : 24.5 MPa (250 kgf/cm
Right-hand and left-hand sides are determined by facing
in the direction of forward travel.
Write product identification numbers in the Machine
Numbers section. Accurately record all the numbers to
help in tracing the machine should it be stolen. Your deal-
er also needs these numbers when you order parts. If this
manual is kept on the machine, also file the identification
numbers in a secure place off the machine.
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
INTRODUCTION
, 250LC , 350LC
-3 -3
Hitachi Hydraulic Excavator are
-3
, 250LC
-3
2
, 3560 psi)
Warranty is provided as a part of Hitachi's support pro-
, gram for customers who operate and maintain their
-3
equipment as described in this manual. The warranty is
, explained on the warranty certificate which you should
-3
have received from your dealer.
, This warranty provides you the assurance that Hitachi will
-3
back its products where defects appear within the war-
ranty period. In some circumstances, Hitachi also provides
field improvements, often without charge to the customer,
even if the product is out of warranty.
Should the equipment be abused, or modified to
change its performance beyond the original factory
specifications, the warranty will become void and field
improvements may be denied.
Setting fuel delivery above specifications or otherwise
overpowering machines will result in such action.
Only qualified, experienced operators officially licensed
(according to local law) should be allowed to operate
the machine. Moreover, only officially licensed personnel
should be allowed to inspect and service the machine.
Prior to operating this machine, including satellite com-
munication system, in a country other than a country of its
intended use, it may be necessary to make modifications
to it so that it complies with the local regulatory standards
(including safety standards) and legal requirements of
that particular country. Please do not export or operate
this machine outside of the country of its intended use
until such compliance has been confirmed. Please contact
Hitachi Construction Machinery Co., Ltd. or any of our
authorized distributor or dealer if you have any questions
concerning compliance.
©2013 Hitachi Construction Machinery Co., Ltd.
All rights reserved.