Paradyne 3162 Quick Reference page 11

Factory default configuration options are shown in boldface type in the following tables.
Table 1. Network Interface Configuration Options
Option
Line Framing Line Framing
Format:
Line Coding Format: Line Coding Format:
Bit Stuffing: Bit Stuffing:
Line Build Out (LBO): Line Build Out (LBO):
Management Link: Management Link:
ANSI Performance ANSI Performance
Report Messages:
Network Initiated Network Initiated
LLB:
Network Initiated Network Initiated
PLB:
Circuit Identifier: Circuit Identifier:
Factory 1
D4
ESF
AMI
B8ZS
62411
Disable
0.0
–7.5
–15
–22.5
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
[Text Field]
Clear
Factory 2
D4
ESF
AMI
B8ZS
62411
Disable
0.0
–7.5
–15
–22.5
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
[Text Field]
Clear
9
Comments/Description
Selects D4 or ESF framing format. Selects D4 or ESF framing format
Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding
format.
Provides enforcement of ones
density protection per density protection per
AT&T TR 62411.
Provides Line Build Out in dB. Provides Line Build Out in dB
S ecifies whether the FDL s Specifies whether the FDL's
Management Link is enabled.
Sends ANSI Performance Re ort Sends ANSI Performance Report
Messages.
Network initiated LLB allows LLB to Network-initiated LLB allows LLB to
be controlled by inband LLB codes.
Network-initiated PLB allows PLB
to be controlled by FDL PLB to be controlled by FDL PLB
messages.
S ecifies the transmission vendor s Specifies the transmission vendor's
circuit identifier.