Logging In To The Blc; Configuration - Paradyne 8995 Installation And User Manual

Logging In to the BLC

To access the web interface:
Procedure
1. Open your web browser. (Internet Explorer Version 6 or above is recommended.)
2. Type http:// and the IP address of the SCP card into the Address field of your
browser window. The default address is 10.10.10.10:
3. A login window appears. Enter the User ID and Password, and click on OK. The
web interface screen appears.
4. Click on the Configuration menu tab. The configuration screens listed depend on
the types of line cards and SCP card installed in the chassis.

Configuration

The following list shows the web interface Configuration screens most likely to require
modification, along with some fields found on each screen. Refer to the online Help for
information.
Configuration
— Port A
— Port A VPI
— Port A Start and End VCI
— Segment Endpoint
— Port B
— Port B VPI
— Port B VCI
Configuration ➔ ATM ➔ Cross Connection ➔ Create
by Slot
— Start and End Slot
— Start and End Port
— Slot VPI
— Slot VCI
— Segment Endpoint
— SCP
— SCP Port VPI
— SCP Port Start VCI
— SCP Segment Endpoint
— Upstream Profile
➔ ➔
ATM Cross Connection
➔
Create by Port
16