Handling And Safety Instructions - IMAGO Vision Cam XM2 Hardware Manual

1 Handling and Safety Instructions

1 Handling and Safety Instructions
Depending on the operating conditions, the housing temperature can exceed
60 °C. There is a risk of injury!
Electrical installation should be executed without power applied to the device
and connected devices.
EMC conformity according to EN/IEC 61000-6-2:2005 is qualified for cable
lengths ≤ 30 m.
Only open the housing if advised by IMAGO!
 Warranty void if product is opened without authorization by IMAGO.
Please take special note of the voltage range which may be applied to the device.
Otherwise, permanent damage to the device may result!
Due to the characteristics and physical principles of flash memories, SSDs have a
finite lifetime depending on the number of write operations. Therefore, take
care of regular write operations to prevent early flash wear out.
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Page 3 / 24