Carrier 40MBFAQ Service Manual page 46

40MBFAQ: Service Manual
DISASSEMBLY INSTRUCTIONS (CONT)
Evaporator
NOTE: Remove the front panel, panel frame subassembly, upper air outlet frame assembly and lower air outlet frame assembly before
disassembling the evaporator.
Procedure
1) Remove 1 screw then remove the
auxiliary water pan.
Remove one screw used for the ground
connection.
Pull out the coil temperature sensor.
2) Remove the evaporator subassembly.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Illustration
46