Download Print this page

ZEROXCLUB ERY01 Operating Instructions

7 pillow tet-lcd color monitor

Advertisement

Quick Links

Trouble Shooting
If You Have Problem Operating this Product, Please Refer To this Section.
The Most CommonProblems are Listed Below. Along With Likely Cause
and Solutions.
Monitor No Power
-Car Engine Has Not Been Started. Start the Car Engine.
-Incorrect Wiring Connection. Check the Wiring.
-Monitor Power is 0ff in Default, Press Power Button on Monitor to Turn on.
Camera No Power
-Car Engine Has Not Been Started. Startthe Car Engine.
-Make Sure Monitor Has Power Firstly.
-Incorrect Wiring Connection. Check the Wiring.
Not Showing Color Im age In Monitor
-Make Sure Monitor Setting Right, Go Menu to Find Setting For -System,
Make Sure lt is NTSC US TV System.
-Find one Place Which Have Good Light or Test lt again In Day Tim
Note
If you encounter the following:
1.When opened, it is found to be defective or missing parts;
2.You don't like it when you received;
3.Need technical support and help during the installation process;
4.After completed installation, found it can't work properly;
5.Camera or monitor gets accident during use;
6.Any other after-sales problems that need help.
Please contact us in time, we promise to provide you with the best service
and technical support, and help you solve the problems. This is our contact
Email:
susanjiying@hotmail.com
You can write it down if you need, please feel free to contact us!
Email :
susanjiying@hotmail.com
Contact Person : Susan
Warranty : 1Year Factory Warranty
(24 hours online)
ERY01
Be for e Ope rat ing This S et
P lea s e Re a d Thes e Inst ruc tion s Com ple te ly

Advertisement

loading

Summary of Contents for ZEROXCLUB ERY01

  • Page 1 This is our contact Email: susanjiying@hotmail.com (24 hours online) ERY01 You can write it down if you need, please feel free to contact us! Be for e Ope rat ing This S et Email : susanjiying@hotmail.com...
  • Page 2 ① ② ③ Power Cable Connect To the Screen Green Black Use Video Cable to Use Video Cable to Connect the Second Connect the Camera (AHD2 Signal) (AHD1 Signal) Camera Monitor and Camera 1.Power:Press Power On and Off. CH2 Camera is Press "CH-"...