Table of Contents
Advertisement
eats Wal aye Ol Eyer
Locating a Particular Selection
There are two ways to locate the beginning
of a selection on the current disc.
A. To locate sequentially (Automatic
Music Sensor)
- Press !44 once to locate the
beginning of the current selection.
~- Press PPI once to locate the
beginning of the next selection.
— Hold down !<44 or PPI to skip
selections.
B. To locate a selection directly
TRACK
:
using the remote
ran
;
commander
LA} hi
8
1) Press TRACK.
2) Press one of the numeric buttons
ENTER
corresponding to the selection you
10/0
-
want to play.
3) Press ENTER.
44/p>1
<</>>
To enter a number greater than 10, see
page 13.
Locating a Particular Point in
a Selection (CDP-CX100 only) Fil
RM-P332
There are two ways to locate a desired
point on a disc.
A. To locate a point on the current
disc while monitoring the sound
Hold down 44 or B® on the remote
commander (RM-DX100) during
playback.
B. To locate a point on the current
disc quickly by watching the
display
teri
Press Uf, then hold down 44 or PP on
it
the remote commander (RM-DX 100).
The search speed is faster. but no
sound can be heard. Find the desired
point by watching the display.
Press 18 or ® again at the desired point
to resume playback.
"1 1" appears in the display
if you continuously press ®> during playback at
the end of the disc. ""s —" appears in the
display. Press 44 or I4< to return to the normal
display.
#0 TS¢
Sk
mo
ac
Ose
OL0
a7
Seay
- SOs
Advertisement
Table of Contents
