a)
b)
¢)
JOG
eats Natale ms O] Eyer)
Checking Times on the
Display
To check the total number of
selections and total playing time of
a disc
Select the disc and press ENTER to set the
disc to the playing position in continuous
mode. Press @, then TIME.
a) Current disc number
b) Total number of selections on the current
disc
C) Total playing time of the current disc
To check the elapsed or remaining
time
Each time you press TIME while playing a
disc, the display changes to give you the
following information:
a) Elapsed time in the selection being
played (current selection)
b) Remaining time in the current selection
If the current selection number is 32 or
greater, "- -.— -" appears.
Cc) Total remaining time on the current disc
Available only in continuous play
mode.
Note on time information
The remaining time information is not available in
shuffle or program mode.
What is this indication?
~HO
TIS
This indication appears when;
— you specify an empty disc slit.
~ you have inserted a disc with the label facing
left.
When this indication appears, you cannot rotate
the rotary table. Select another disc and press
ENTER, or press UNLOAD, then re-insert the
disc.
If you press ENTER or > without installing discs
in ALL DISCS mode.
The rotary table continues rotating until all disc
stits are checked.
Press UNLOAD, then install discs.