Table of Contents
Advertisement
Suunto Spartan Sport Wrist HR Baro
CAUTION: Keep the area around the air pressure sensor holes on the left-side of your
watch free of dirt and sand. Never insert any objects into the holes as this may damage the
sensor.
Swipe up or press the lower button to view the current altitude and barometric pressure.
Tap to view the current temperature.
Swipe left or press the middle button to switch between altimeter and barometer trend
graphs.
Make sure you have set your altitude reference value correctly (see 3.3. Altimeter). The
altitude of your current location can be read from most topographic maps or major on-line
map services such as Google Maps.
Changes in local weather conditions affect altitude readings. If local weather changes often,
you should reset the altitude reference value regularly, preferably before starting your next
journey.
TIP: While in the altitude and barometric pressure view, keep the middle button pressed
for quick access to the outdoor settings where you can adjust the reference value.
Automatic alti-baro profile
Weather and altitude changes both cause a change in air pressure. To handle this, Suunto
Spartan Sport Wrist HR Baro automatically switches between interpreting changes in air
pressure as altitude or weather changes based on your movement.
If your watch senses vertical movement, it switches to altitude measuring. When you are
viewing the altitude graph, it is updated with a maximum delay of 10 seconds.
If you are at a constant altitude (less than 5 meters of vertical movement within 12 minutes),
your watch interprets air pressure changes as weather changes and adjusts the barometer
graph accordingly.
32
Advertisement
Table of Contents
