Gigabyte GA-945GMF-S2 User Manual page 70

Setting Up 6-Channel Audio
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager icon in your system tray (you
can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 6CH Speaker.
STEP 3:
Connect the 6-channel speakers to the audio jacks
on the motherboard and the surround cable, a small
window will pop up and ask you what type of
equipment is connected. Choose a device depend-
ing on the type of speaker connected (6-channel
audio consists of Front Speaker Out (Line Out),
Rear Speaker Out, and Center/Subwoofer Speaker
Out) then click OK. The 6-channel audio setup is
completed.
GA-945GM-S2 / GA-945GMF-S2 Motherboard - 70 -