Multicast; Igmp Snooping - Paradyne 6212 User Manual

Multicast

This option enables the IGMP proxy, which allows NAT clients to participate in
IGMP multicast groups. It should only be enabled if NAT is also enabled.
To enable Multicasting:
Procedure
Figure 3-20. Multicast
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.

IGMP Snooping

Use the IGMP Snooping screen to specify whether IGMP Snooping is enabled.
When IGMP Snooping is enabled, the router analyzes Internet Group
Management Protocol (IGMP) packets to learn multicast group address and port
associations.
To enable IGMP Snooping:
6212-A2-GB22-00
1. From the Home screen, click on Advanced.
2. Under Advanced, select Muliticast.
3. Click in the check box to enable the IGMP proxy. Select the WAN connection
that IGMP messages should be sent to.
1. From the Home screen, click on Advanced.
2. Under Advanced, select IGMP Snooping.
January 2005
3. Using the Web Interface
3-25