Table of Contents
Advertisement
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the final
rinse.
When the rinse aid chamber is empty,
the rinse aid indicator turns on. If the
drying results are satisfactory while using
multi-tablets only, you can deactivate the
notification for refilling the rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press the programme button
immediately.
The indicator
starts to flash.
2. Wait until the indicator
to flash and the remaining
programme indicators are off.
The indicator
shows the current
setting:
•
is on = Rinse aid empty
notification is on.
•
is off = Rinse aid empty
notification is off.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
7.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal for the end of the
programme
Make sure the appliance is in user mode.
1. Press the programme button twice.
The indicator
2. Wait until the indicator
to flash and the remaining
programme indicators are off.
The indicator
setting:
•
•
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
7.5 AirDry
AirDry improves the drying results with
less energy consumption. During the
drying phase, the door opens
continues
automatically and remains ajar.
starts to flash.
shows the current
is off = The acoustic signal is
off.
is on = The acoustic signal is
on.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
ENGLISH
11
continues
Advertisement
Table of Contents
