Electrolux EEA17200L User Manual page 10

Hide thumbs Also See for EEA17200L:
Table of Contents

Advertisement

10
www.electrolux.com
flashes and the indicators
and
are on.
7.2 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
Water hardness
German de‐
grees (°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill indicator
active.
Multi-tabs containing salt are
not effective enough to
soften hard water.
How to set the water softener
level
Make sure the appliance is in user mode.
French de‐
mmol/l
grees (°fH)
84 - 90
8.4 - 9.0
76 - 83
7.6 - 8.3
65 - 75
6.5 - 7.5
51 - 64
5.1 - 6.4
40 - 50
4.0 - 5.0
33 - 39
3.3 - 3.9
26 - 32
2.6 - 3.2
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
<7
<0.7
your area. Your local water authority can
,
advise you on the hardness of the water
in your area. Set the right level of the
water softener to assure good washing
results.
Softening hard water
increases the consumption
of water and energy as well
as the programme duration.
The higher the level of water
softener, the higher the
consumption and the longer
the duration.
mg/l (ppm)
835 - 904
755 - 834
645 - 754
505 - 644
395 - 504
325 - 394
255 - 324
185 - 254
70 - 184
<70
1. Wait until the indicator
flash, the indicator
to flash and the remaining indicators
are off.
The intermittent flashing of the indicator
shows the current setting: e.g. 5
flashes + pause + 5 flashes = level 5.
2. Press the programme button
repeatedly to change the setting.
Each pressing of the programme
button increases the level number.
After reaching the level 10, the count
starts again from the level 1.
Clarke
Water soften‐
degrees
er level
58 - 63
10
53 - 57
9
46 - 52
8
36 - 45
7
28 - 35
6
23 - 27
1)
5
18 - 22
4
13 - 17
3
5 - 12
2
< 5
2)
1
starts to
continues

Advertisement

Table of Contents
loading

Table of Contents