Table of Contents
Advertisement
Rear Panel
SPEAKER Connectors
POWER CORD
Connect to an AC 120V,
60Hz outlet only.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Caution
When you select the function mode to VIDEO1 using the
VIDEO1 button on the remote control, the signal is output
from the front L/R speakers, but not from the VIDEO1
VIDEO OUT and AUDIO OUT L/R connectors.
VIDEO 1 (Input/Output) Connectors
VIDEO 2 (Input) Connectors
WOOFER OUT Connector
VIDEO SELECTOR Switch
Refer to explanation below*.
FM 300Ω Coaxial Antenna Connector
AM Antenna Connectors
MONITOR OUT
Connector
S-VIDEO OUT
Connector
*
switch
VIDEO SELECTOR
You can enjoy NTSC or PAL discs by setting the VIDEO
SELECTOR switch to choose the appropriate system.
PAL:
Select when DVD receiver is connected with
PAL-TV.
NTSC: Select when DVD receiver is connected with
NTSC-TV.
AUTO: Select when DVD receiver is connected with
Multi system TV.
• When the selected System Select switch does not
coincide with the system of your TV, normal color
picture may not be displayed.
• Set System Select switch when the power is turned
off.
9
Advertisement
Table of Contents
