Dubbing And Editing - Zenith VCM322 Installation And Operating Manual

DUBBING AND EDITING

If you wish to edit or dub your camcorder (or another VCR) recordings to this VCR, the rear
(or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and
easy. The direct A/V jacks will also provide better picture results than using the RF jack on the
rear panel.
Another VCR: Play
From
AUDIO and
VIDEO Output
1.
Connect the camcorder's (or another VCR's) A/V outputs to the VCR's front A/V inputs as
illustrated above.
2.
Select the input channel "LINE2".
• If you have connected your VCR to the A/V input jacks on the rear of VCR, you should
select the input channel LINE1.
• Select LINE1 or LINE2 A/V input channel using INPUT.
3.
Play the tape in the camcorder (or another VCR). If you have a TV connected to your
VCR, you can see the video playing.
4.
When you desire recording to begin, press VCR's REC/ITR once to start.
NOTE
Before recording, please confirm the recording start position.
30
Camcorder:
Play
From
AUDIO and
VIDEO Output
OR
Your VCR: Recording
To AUDIO/VIDEO Input