Remote Control - Zenith VCM322 Installation And Operating Manual

REMOTE CONTROL (Cont'd)
MENU
Displays the programming menu on the TV screen.
Quits the current screen or Pop-up, or returns to the
currently tuned channel (pages 14, 16).
CH/TRK (channel/tracking) (
• To scan up or down through memorized channels (page 16).
• To manually adjust the tape's picture onscreen (page 21).
TV/VCR
To view channels selected by the VCR tuner or by the TV
tuner (pages 10, 25).
STOP
To stop playback or recording (pages 21, 25).
REMOTE CONTROL OPERATION
Aim the remote control at the sensor on the front panel of the VCR.
HOW TO INSTALL THE BATTERIES
1.
Remove the battery compartment cover.
2.
Insert 2 "AAA"-size batteries, match "+" and "-".
3.
Replace the cover.
NOTES
• The remote control will not operate properly if something
comes between the VCR and the remote control.
• If the effective range is short, try new batteries.
• An object between the VCR and remote control may block the
invisible light beam and operation will be impossible.
• Batteries installed with incorrect polarity may leak and damage
your Remote Control.
• Do not mix old and new batteries or carbon types with alkaline
types.
• Remove the batteries from the battery compartment if the
remote control will not be used for a long time.
12
D D / E E )
input