6.5.1
Type of conductor connection
Terminal board
Connection with cable lug
DIN 46 234
Bend down the cable lug for the
connection.
Connection of an individual conduc‐
tor with terminal clamp
Connection of two conductors of
approximately the same thickness
with terminal clamp
①
Connecting bar
②
Line supply cable
③
Motor connecting cable
④
Cover plate
6.6
Connecting converters
NOTICE
Material damage caused by an excessively high supply voltage
Material damage can occur if the supply voltage is too high for the insulation system.
• Observe the values in the following tables.
SIMOTICS machines can be operated with SINAMICS converters (uncontrolled and controlled
infeed) when maintaining the permissible voltage peaks.
1PC134, 1PC136 crane motors SH 132 ... 315
Operating Instructions, 12/2023, A5E43212221A
Electrical connection
6.6 Connecting converters
Conductor
cross-
section
[mm²]
... 25
... 10
... 25
63