Table of Contents
Advertisement
Installer Menu
Installer Menu Items 14-I through 34-I: Detailed Descriptions
channel up higher than the highest) and TV
turns off.
14-I. NOT USED
15-I. SLEEP TIMER
When set to 1, the Sleep Timer feature is available to the user
(but no message is displayed prior to turn-off). When set to 0, the
Sleep Timer is not functional.
16-I. EN. TIMER
Set to 1, Timer functions are available to user. Set to 0 to disable
Timer functions.
Note: Clock must be set in order to use Timers.
17-I. ALARM
Gives you the option of making the alarm function available to
the user. Set to 1, Alarm function is available to user. Set to 0 to
disable the Alarm function.
Note: Clock must be set in order to set the Alarm.
18-I. NOT USED
19-I. NOT USED
20-I. FEATURE LEVEL
Default set to ZEN 1 for Zenith IR remote control opera-
tion. Set O, P LBL for Zenith Private Label IR remote
control operation.
Warning:
Do not set to "0" or remote will not control TV.
21-I. V-CHIP
Set to 1 to activate V-Chip (Parental Control); have it available to
user to filter or control or restrict programming content. Set to 0
to turn V-Chip feature off, not available to user; no programming
restrictions can be set.
22-I. MAX BLK HRS
Set 0 to 99 for the maximum V-Chip (Parental Control) block
hours. Default setup is 12 blocking hours.
23-I. CAPTION LOCK
Set to 1 to restore previous Caption On/Off state after TV turns
off. When set to 0, Captions are always off, when TV is initially
turned on.
P A G E 4 0
24-I. TEXT MODE
Determines whether TEXT 1, TEXT 2, TEXT 3, or TEXT 4 decoding is
enabled when TEXT is turned on (either from the Setup Menu or
directly with CC on the remote).
TIP: Set Text Mode to 1 only if text is offered in your video
system.
25-I. FUNCTION PRE.
Set to 0 to suppress CHANNEL PREVIEW from the FUNCTION menu
with some Pay-Per-View systems.
26-I. NOT USED
27-I. NOT USED
28-I. CH. OVERRIDE (Channel Override)
When set to 1, the user can select channels with either Channel
Up/Down or by direct keypad entry. When set to 0, only those
channels that are entered for scanning may be selected by direct
keypad entry. Note: If set to 0, Auto Program is locked; (as shown
on Setup menu) channel search is not available.
29-I. OLD OCV (On Command Video
Set to 1 for operation with systems from On Command
Corporation.
30-I. ACK MASK
M.P.I. Communication Parameter. Leave at default setting unless
changed by Pay-Per-View provider.
31-I. POLL RATE
M.P.I. Communication Parameter. Leave at default setting unless
changed by Pay-Per-View provider.
32-I. TIMING PULSE
M.P.I. Communication Parameter. Leave at default setting unless
changed by Pay-Per-View provider.
33-I. Y/C LOOPOUT
Set to 1 to enable S-Video loopout.
Set to 0 to disable S-Video loopout.
34-I. CAMPORT ENABLE
Set to 1 to enable the front AUX (Camport) input.
Set to 0 to disable front AUX input.
TM
)
206-3858
Advertisement
Table of Contents
